Environmental, Health & Safety Policy & Programs




Environmental, Health and Safety Objectives

  • To operate our processes with minimum environmental impact and occupational health and safety hazards by adopting best available technologies, compliance of relevant legislation and highest standard of safe practices.
  • To continue to evaluate, review and improve our performance in environment, health and safety practices.
  • To implement comprehensive programs to prevent potential occupational risk and reduce negative impact to the environment.

STATS ChipPAC's Long Term Environmental, Health and Safety Goals

10 year goal from 2009 to 2018:
  • Reduce energy consumption / CO2 emission per unit by 30% using 2008 as baseline
  • Re-use / recycle >20% of water purchased
  • Recycle >70% of hazardous and non-hazardous waste generated
  • Achieve world-class safety performance in terms of accident frequency and severity rate lower than industry benchmark
    >   2010 Electronic Product Benchmark (Source:  Ministry of Manpower, Singapore) per million man-hours worked:
              - Accident frequency rate (FR) = 0.7
              - Accident severity rate (SR) = 10

Key EHS Programs and Achievements in 2017

In 2017, STATS ChipPAC implemented key environmental, health and safety programs and initiatives. 

Achieved 44.4% Scope 1 & 2 energy reduction (equivalent to 41.5% reduction in CO2 emissions [tonnes] / K-units) compared to 2008 baseline through Energy Conservation Programs (2017 Goal: 15% reduction)
  • Optimized chiller system operation through load control
  • Optimization of ACMV through reducing VSD speed
  • Lighting system upgrade with LED conversion
  • Optimization of STATS ChipPAC Korea's CDA pressure regulation
  • Optimized CDA operation
  • Chiller efficiency improvement to run free cooling system on chiller in colder weather and hot recovery system from CDA to heat city water in UPW and fresh air in MAU

Achieved 29.5% water reduction/recycling through Water Conservation Programs (2017 Goal: 25% reduction/recycling)
  • Maintain existing water recycling system

Achieved 71.2% waste recycling through Waste Recycling Programs (2017 Goal: 75% recycling)
  • Continue to drive waste recycling program improvement

Achieved 0.4 Accident Frequency Rate (FR) and 1.9 Accident Severity Rate (SR) through Safety Programs (2017 Goal: 0.7 Frequency Rate; 10 Severity Rate)
  • Safety patrol, education and assessment
  • eWLB and wafer level bump solvent pipe cleaning program
  • Fire and chemical drill
  • Health awareness medical talk

Responsible Business Alliance (RBA) Awareness Training
  • All employees are required to complete RBA awareness training; this resulted in more than 7,700 training hours



 

 

Print page